Replacing OEM seats, how to resolve the Airbag light

[RockTrooper]

Hey folks, I pulled the old and worn out OEM seats from my Jeep JK and upgraded with some suspension seats. The new seats do not reuse the OEM seat belt setup, so I am going with a 5 point harness. I resolved the seat belt warning by reconnecting up the seat belt receiver with the connector, all good there. However I'm having issues resolving the airbag warning light on the dash. I removed all of the wiring from the seat and even pulled the airbag and connected it, still does not clear the airbag light. Has anyone done this and found a way to clear the light? Pic attached for reference.



Any guidance / suggestions would be appreciated. Thanks!